• High-impact, vandal-resistant enclosure
• Advanced color CCD network dome camera
• NightSense for low light situations
• High-performance H.264, MPEG-4, and M-JPEG
• Direct-to-iSCSI recording
• Storage efficient tri-streaming: Dual MPEG-4/H.264 and M-JPEG simultaneously
• Power over Ethernet (IEEE 802.3af compliant)
• ONVIF compliant

The NWD-455 FlexiDome IP is a high-performance, 1/3-inch CCD network camera, designed to ensure the highest possible image quality at all times. This ultra-compact and vandal-resistant camera provides DVD-like quality MPEG-4 video at up to 25 and 30 images per second (for PAL and NTSC respectively) or H.264 encoding. Network video signals are sent over IP networks and can be received and displayed on a PC web browser, viewed and recorded using the DiBos hybrid recording system, or managed as part of a VIDOS or BVMS video management system. Moreover, a BOSCH Video over IP (BVIP) decoder can decode the stream for viewing on a CVBS or VGA monitor.

FlexiDome IP uses H.264 or MPEG-4 compression, bandwidth throttling, and multicasting capabilities to manage bandwidth and storage requirements efficiently, while delivering the best image quality and resolution. The analog video service output and the on-screen displays (OSD) simplify focus adjustment and network configuration, leading to lower installation and support costs. Power over Ethernet (PoE) makes installation easier and more cost-effective, since these cameras no longer require AC power.

Functions
H.264 Baseline Profile Encoding
Firmware version 4.0 and higher enables the camera to use H.264 Baseline Profile to encode the video signal. This reduces the required bit rate for a given quality setting, or increases the quality while keeping the bit rate setting. Because H.264 Baseline Profile does not support field encoding, interlaced video is not possible, thus resolution is limited to a maximum of 2CIF. H.264 encoding requires double the performance in respect to MPEG-4. Frame rate values must therefore be divided by two.

MPEG-4 video encoding
The FlexiDome MPEG-4 encoder creates high-quality streaming video at low bit rates, minimizing bandwidth and storage requirements, which further reduces costs. Each FlexiDome IP camera can deliver up to 25 and 30 images per second (PAL and NTSC) at true 4CIF video resolution.

ONVIF
ONVIF (Open Network video Interface Forum) compliancy ensures integration with third party management systems and video network devices.

Intelligence
The FlexiDome IP supports increased intelligence at the edge that provides powerful tamper detection for various combined picture cases arising from: video loss, masking, hooding, defocusing, and diverted camera. Bosch also offers Intelligent Video Motion Detection (IVMD) as an additional licensable option. This provides video content analysis (VCA) directly at the video input for even more advanced VCA.

Tri-streaming video
FlexiDome IP cameras can generate two separate H.264/ MPEG-4 video streams and one JPEG stream simultaneously, while giving access to five users at a time. This advanced tri-streaming capability, not typically found in other IP CCTV systems, enables the user to optimize live viewing and recording requirements to meet specific site and enterprise needs. For example, BOSCH Video over IP Systems (BVIP) can be configured to record video at one quality setting (e.g. 3.75 IPS at 2CIF), while simultaneously providing live images at the best possible image quality (e.g. 30 IPS at 4CIF). Alternatively, the system deliver a high bandwidth, H.264/MPEG-4 stream to a local LAN user, while simultaneously streaming a low bandwidth H.264/MPEG-4 stream to a remote user over a WAN connection, while using the JPEG stream for remote viewing, for instance, on a PDA.

Power options
Three power options, PoE, 24 VAC (12 to 28 VAC) and 12 VDC (+11 to +36 VDC), are available on the NWD-455. Utilizing PoE makes installation easier and more costeffective, since cameras do not require a local AC power source. Additionally, they can use an uninterruptible power supply (UPS), which will allow continuous operation, even during a power failure, e.g. in emergencies.

OSD-based network setup
Network parameters and basic camera set-up, such as lens set-up and back focus, are quickly and easily performed using the on-screen displays (OSD) and analog video service output. Unlike other IP cameras, no network connection, PC configuration utilities, or other tools are required to set up FlexiDome IP.

Recording
The FlexiDome IP cameras offer unparalleled recording options – network-attached utilizing iSCSI devices, and of course centrally, using network video recorders (NVRs). The iSCSI RAID 5 storage support enables a camera to act as a conventional DVR, while streaming high-performance live video across the network. The cameras also offers 10 Mb internal RAM storage.

Ordering Information
NWD-455V03-10P FlexiDomeXT IP Camera
PAL, 2.6 to 6 mm F1.4 lens

NWD-455V04-10P FlexiDomeXT IP Camera
PAL, 3.7 to 12 mm F1.6 lens

NWD-455V09-10P FlexiDomeXT IP Camera
PAL, 9 to 22 mm F1.4 lens