IP Network: Panasonic BLC111 Network IP Camera @ Sovereign

Panasonic BLC111 Network IP Camera

[Click image for a larger version.]

Competitive trade price
Contact tradeprice@cctvbiz.com

DESCRIPTION

Simultaneous MPEG-4 and JPEG
IPv4/IPv6 Dual Stack
Built-in Microphone
Built-in Human Detection Sensor
Privacy Mode
Remote Pan and Tilt Control
10x Digital Zoom Function
Multi-camera Capability
Color Night View Mode (3.00 lux)
Cell Phone Monitoring

Simultaneous MPEG-4 and JPEG

Cameras simultaneously send MPEG-4 images in three resolutions (VGA, QVGA, and SCIF), and JPEG images in the same three resolutions in favour motion, standard, and favour clarity image-quality types. MPEG-4 is recommended for viewing smooth motion images, and JPEG is recommended for recording higher quality images.

IPv4 / IPv6*1 Dual Stack

These are the world’s first*2 network cameras with standard IPv6 support. Thanks to the dual-stack IPv4/IPv6 structure, they can be installed both on an IPv4 network today, and on an IPv6 network in the future. By passing the stringent requirements for Phase 2 certification, these cameras have also become even more reliable and interoperable. *3

*1 To connect using IPv6, it is necessary to subscribe to the ISP’s "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4 Tunneling" service. The camera will not work in an IPv6-only network. For more information on IPv6, visit http://www.ipv6.org/.
*2 The world’s first network cameras of their kind (as of August 2004), featuring an originally developed IPv6-ready protocol stack.
*3 This logo mark is issued by the IPv6 Ready Logo Program Committee, an IPv6 promotion group established mainly by the IPv6 Forum.

Built-in Microphone

Sounds picked up by the built-in microphone can be heard through the PC. Video monitoring with sound enhances security by providing additional information that images cannot convey.

Built-in Human Detection Sensor

The sensor*1 detects people, animals, etc., due to temperature changes. When detected, the image or a series of images is sent to you by e-mail*2 or FTP data transfer*3 for easy checking.

*1-1 The sensor detects heat by picking up the infrared light naturally emitted from people and animals. Certain thermal environments, sunlight, air conditioners, heaters, etc., may cause detection errors or decrease the range of the sensor.
*1-2 The time needed to send images by e-mail from the camera will vary depending on the condition of the network. When setting the camera to send e-mail images to a cell phone, we recommend setting a longer interval time. If the interval is set too short, more images will be e-mailed to your cell phone and therefore your cell phone charges may be higher.
*2 PDP before SMTP authentication and SMTP authentication (PLAIN LOGIN and CRAM-MD5) are supported.
*3 The sensor’s detection history can also be emailed to you once a day at a preset time.

Privacy Mode

When you return home, just press a button to cover the lens and protect your privacy. System administrators can also do this over the network

Remote Pan and Tilt

You can use a PC or cell phone directly to change the direction that the camera is facing while monitoring the image. This lets you monitor a large area with a single camera.

10 x Digital Zoom Function

It’s so reassuring to see your pet’s happy face while you are out. A simple mouse operation is all you need to enlarge the image, using the 10x digital zoom, so you get a clear view of your pet’s expression.

Server
Image data compression system	JPEG (3 Levels), MPEG-4
Video resolution	640 x 480, 320 x 240, 192 x 144
Image quality	JPEG (favor clarity, standard, favor motion), MPEG-4
Frame rate^*1	Max. 30 frames/sec (640 x 480^*3, 320 x 240 or 192 x 144)
Security	User ID/Password
Supported protocols	IPv4/IPv6 dual stack IPv4: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, UPnP, SMTP Authentication, RTP, RTSP, RTCP IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, RTP, RTSP, RTCP
User access limit	Max. 30 simultaneous accesses
Buffered images^*2	Approx. 250 images: (320 x 240, standard image quality)with time display
Network camera
Zoom	10 x digital zoom (by area)
Viewing angle	Horizontal: 49º (total 143º), vertical:32º (total 82º)
Pan (horizontal direction)	-50º up to +50º
Tilt (vertical direction)	-40º up to +10º
Revolving speed	Pan: Max. 50º/sec Tilt: Max. 50º/sec
Number of pixels	1/6-inch CMOS sensor, approx. 320,000 pixels
Lens focal point	Fixed (focal range: 0.3 m to ∞)
Lens brightness	F2.8
Required light intensity	10 to 100,000 lux (in Color Night View Mode: 3 to 10,000 lux)
Audio
Voice direction	Half-duplex one-way communication (transceiver system)
Voice data compression system	ADPCM 32 kbps
Voice band	300 Hz to 3.4 kHz
Audio input	Built-in microphone
Terminal
Network interface	10Base-T/100Base-TX Ethernet RJ-45 connector
General
Operating temperature	41ºF to 104ºF (+5ºC to +40ºC)
Operating humidity	20% to 80% (No condensation)
Dimensions (H x W x D)	98 x74 x61 mm (3 7/8 x 2 15/16 x 2 3/8 inches)
Weight (Only the unit)	180 g (0.4 lb)
Power supply	AC adaptor: Input 100-240 V AC, Output 9 V DC
Consumption	4.0 W

*1 Frame rate may slow down depending on the network envir onment, PC performance, image quality, or what object you view.
*2 The maximum number of frames changes depending on the resolution and image quality.
*3 For MPEG-4 only. Not applicable to JPEG.

System Requirements for you PC

Your PC and network must meet the following technical specifications in order for the camera to function properly.

Item	Requirement
Operating system	For IPv4 Connection Microsoft® Windows® XP, Microsoft® Windows® 2000 For IPv6 Connection Microsoft® Windows® XP Service Pack 1 or later
CPU	Celeron 2.0 GHz or faster is recommended.
Protocol	For IPv4 Connection TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP) For IPv6 Connection TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)
Interface	10/100 Mbps network card
Web browser	Internet Explorer® 6.0 or later (not included)
Audio	PC speaker or headphones (required to use the listen feature)
Additional software	For Windows® XP Windows Media® Player 9 or later (not included; required to view camera images buffered in MPEG-4 format) For Windows® 2000 Windows Media® Player 9 (not included; required to view camera images buffered in MPEG-4 format)