IP Network: Panasonic BLWV10 Wireless Camera Monitoring System @ Sovereign

Panasonic BLWV10 Wireless Camera Monitoring System

Competitive trade price
Contact sales@sovereigneu.com

DESCRIPTION

Camera Image Monitoring
Pan/Tilt Feature
Sensor Alert Feature
Camera Image Recording
System Expansion
Multi-Camera Monitoring
Quick Setup

Camera Image Monitoring
Simply connect the BL-WV10 to your Panasonic home network cameras (sold separately) and to your TV, and you’ll be able to view camera images conveniently on your TV. Wireless cameras such as the BL-C30A can be connected as well, meaning you won’t have to worry about running cables from the BL-WV10 to each camera..
Pan/Tilt Feature
Aim the camera wherever you want by simply pressing the navigator keys on the
included remote control.
Sensor Alert Feature
The camera’s built-in sensor detects motion by sensing temperature changes
caused naturally by people or animals moving within the sensor’s range. When the
sensor detects motion, the BL-WV10 can alert you by sounding its built-in buzzer
and by displaying the image from the camera that has detected motion.
This feature is not available with HCM series cameras.
Camera Image Recording
Simply insert an optional SD memory card and you’ll be able to record movies and
pictures of your camera images. Later you can use the remote control to play back
movies and view pictures on your TV that were recorded by the BL-WV10.
System Expansion
Up to 8 cameras can be connected, allowing you to keep an eye on every room with just 1 BL-WV10.
Multi-Camera Monitoring
When multiple cameras are registered, you can view up to 4 camera images at once and switch to monitor a specific camera if necessary.
Quick Setup
Configuration is quick and easy with the BL-WV10’s Quick Setup feature–connect your cameras to the BL-WV10 and Quick Setup will handle the rest.

Note

Recommended Accessories (sold separately)
Compatible router:
• Panasonic BB-HGW700A Network Camera Management System
Compatible Network Cameras:
• Panasonic BL-C10A, BL-C30A (firmware version 1.22 or higher)
• HCM series (firmware version 1.08 or higher, however, some features
cannot be used).
The following HCM series cameras are not supported by the BL-WV10A:
- KX-HCM8
- KX-HCM10
- KX-HCM230
- KX-HCM250
- KX-HCM270
- KX-HCM280A computer network limited to the immediate area, usually the same building or floor of a building. LAN IP addresses, a.k.a local IP address typically begin with 192.168.xxx.xxx.

For the latest firmware, visit http://panasonic.co.jp/pcc/products/en/netwkcam/
This product can send an E-mail to your PC or mobile phone, if a camera disconnection is detected.

Specification details

LAN Interface
Number of Ports	4
Connector Shape	8 pin modular jack (RJ-45)
Physical Interface	IEEE 802.3 (10Base-T) , IEEE 802.3u (100Base-TX), MDI/MDI-X with auto-detect
Wireless LAN Interface
	IEEE 802.11b	IEEE 802.11g
Transmission Method	DS-SS, half duplex	OFDM (IEEE802.11g standard)/DS-SS (IEEE802.11b compatible), half duplex
Transmission Speed ([Standard value]Mbps)	11/5.5/2/1 Mbps (IEEE802.11b standard): automatic fallback	54/48/36/24/18/12/9/6 Mbps (IEEE802.11g standard): automatic fallback
Frequency Range (MHz)	2412 - 2462 (center frequency)
Number of Channels	11
Security	WPA-PSK (TKIP), WPA2-PSK (AES), WEP (64 bit/128 bit/152 bit), SSID, stealth SSID (hidden SSID, permitting/not permitting connection using the ANY key), MAC address filtering	WPA-PSK (TKIP), WPA2-PSK (AES), WEP (64 bit/128 bit/152 bit), SSID, stealth SSID (hidden SSID, permitting/not permitting connection using the ANY key), MAC address filtering
*The figures shown are theoretical maximums and not the actual figures when using the product.User InterfaceFACTORY DEFAULT RESET button: Returns the product
Video Output
Video format	NTSC
Output port	Single port
Output level	1.0 Vp-p (75Ω)
User Interface
FACTORY DEFAULT RESET button	Restoration of default settings
Mode switch	Normal, Setup, Sequential Display
Buzzer	Camera sensor notification
Indicator displays	Power (green/amber/red), Sensor (amber), Alert (green), SD Memory Card (green/amber), Wireless (green), LAN 1–4 (green)
Recording media	SD Memory Card
WIRELESS	Displays the wireless link status
General
Environmental Requirements	Temperature (°C): 0 - 40 (32 - 104°F) Humidity (%): 20 - 85 (non-condensing)
Dimensions (Width ×Height × Depth)	W x H x D: About 220 mm x 42 mm x 171 mm (8.6 in. x 1.6 in. x 6.7 in.) with antenna collapsed and no stand
Weight	About 500 g (1.1 lb.)
Power supply	AC110 V (60Hz) DC12 V (part number PQLV202Y) DC cord length: About 3 m (10 ft.) AC cord length (separate): About 1.8 m (5 ft. 11 in.) Power consumption: 7.5 Wp
Antenna	Diversity antenna
EM radiation shielding	Yes

System Requirements

PC	Operating System	IPv6	Microsoft Windows XP
		IPv4	Microsoft Windows 98SE, Microsoft Windows Me, Microsoft Windows NT ® 4.0, Microsoft Windows 2000, Microsoft Windows XP
	Web browser		Internet Explorer 6.0 or later

Ethernet is a registered trademark of Xerox Corporation in the United States and/or other countries.
Microsoft, MSN, Windows and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Screen shots reprinted with permission from Microsoft Corporation.
All other trademarks identified herein are the property of their respective owners.