| The Panasonics WV-CM143 Colour Monitor is designed for use with Panasonic Line-Fed CCTV Cameras. |
| Up to four cameras can be connected with this monitor, with sequential or manual switching available. |
| Alarm sensor and intercom connection. |
| One video output displays each camera in sequence and any camera switched to the spot monitor position for the use of an additional monitor or video tape recorder. |
| Monitor has 14’ diagonal screen (13" diagonal actual visual size) |
| Sequential switching interval selectable from 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 20 or 30 sec. |
| Built-in protection circuit for any misconnection. |
| STANDBY mode for no picture on the monitor during the sequential switching. |
| Alarm control output for a buzzer or chime. |
| Alarm period selectable from 1, 5,10, 20, 30, 40, 50 or 60 sec. |
| The CCTV camera with michrophone can be connected with this monitor. |
| VTR playback picture can be observed. |
| Reset input for sequential switching from Time Lapse VTR. |
| Automatic bypass circuit for skipping no camera connection. |
| Built-in Automatic Reset Selection function for Spot Monitor Control Input. The automatic reset time is preset to approx. 60 seconds. |
| The following functions are available by using the Set Up menu. |
| | Camera Identification Display
Audio Selection
Timing Selection
Sequential Time Adjustment
Alarm Buzzer Setting
Alarm Time Adjustment
Automatic Reset |
| Bright Compensation Setting |
| The specified Colour CCTV System Camera (Multiplexed VD (VD2) with gen-Iock) can be used with this monitor. Due to the Camera Power Selection Switch. (CAMERA INPUT 1 Connector) |
