Matrix System

The new Panasonic Matrix System150 is ideal for small-scale surveillance applications. The Matrix Switcher can link up to 16 cameras, 4 monitors and 4 controllers. It can be combined with our dome cameras providing excellent image quality.

All of the Matrix System150s 16 channels employ Panasonic proprietary coaxial, multiplex connectors. Video signals, control data, synchronous signals (VD2) and alarm signals all travel over a single cable, reducing the number of lines required for camera installation.
Cables can be as long as 1,200m. This System also supports remote camera control using RS-485 data.

The Matrix System150 is loaded with special features including tour sequencing, alarms, video loss detection, and character displays on the monitor. All features are easy to operate using the WV-CU360C dedicated system controller.

One major feature is the ease of changing system settings using menus displayed on a personal computer. Providing direct control of all device settings as well as user management features, the system administration software bundled with the Matrix System150 imposes no extra burden on system administrators. Access to vital settings data can be restricted to a specified level of user through use of passwords.

The Matrix System150 is ideal for schools, supermarkets, banks, parking lots, warehouses, and correctional facilities. The Matrix System150s small-scale system simplifies operation while providing all the features required for high-level surveillance. Controls up to 16 cameras and 4 monitors. The Matrix System150 is compact, high in quality and cost effective.

Camera

Supports up to 16 cameras.
All 16 channels are coaxial, multiplex cables, reducing the number of cables required and simplifying installation.

Supports up to 16 RS-485, remote-controlled cameras.
Pan, tilt and other cameras lens motions can be controlled either by coaxial, multiplex cable or RS-485 remote-control signals. Cables can be up to 1,200m long.

The video loss detection function automatically detects camera malfunctions.

System

All sequence and alarm modes can be adjusted as needed.
User management features include operator number, password, level, and priority.
Personal computer screen displays simplify set-up and management of alarm histories.
Supports up to 16 alarm inputs and four alarm outputs.

Monitor

Output supports up to 4 monitors.
Character displays show date, time, camera number, camera title, and event information.
Alarm history display shows up to 100 most recent alarms.

External Links

The RS-485 camera ports allow remote surveillance.
The RS232C ports enable connection to personal computers or VTRs.

Power Source 220V - 240V AC, 50Hz
Camera Input (1 - 16) 1.0 V/75 ohms composite video signal
0.5 V/75 ohms data signal and
2.5 V/75 ohms vertical timing pulse multiplexed
Camera Output (1 - 16) 1.0 V/75 ohms composite video signal
Monitor Output (1 - 4) 1.0 V/75 ohms composite video signal
External Input 1.0 V/75 ohms composite video signal
External Output 1.0 V/75 ohms composite video signal
RS-485 (Camera) Port RS-485 6-conductor modular jack
Data Port RS-485 6-conductor modular jack
Alarm Port 25-pin D-sub connector
Serial Port 9-pin D-sub connector
Camera Switching Input RCA pin jack
Ambient Operating Temperature 10 °C ~ +50 °C
Ambient Operating Humidity Less than 90 %
Dimensions 420 mm (W) x 88 mm (H) x 350 mm (D)
Weight (approx.) 6 kg